Avec le pcsx2, oui mais il faut avoir une bonne config:

Recommended System: (Will run optimized games at full speed or close to full speed; ie. games like FFX, FFXII, Disgaea 2)

3.0 Ghz or higher Intel Core 2 Duo or Quad-Core
8600 GT or higher
1GB Ram (2GB if using Vista)

Optimum System:

4.0 Ghz Intel Core 2 Duo or Quad-Core
8800 GT or higher
2GB Ram

Le jeu marche à full fps sur le mien en tous cas ,
mais les persos comme lee,gai-sensei,kakashi,azuma ,font crasher l'ému avec les dernières versions (pcsx2 0.9.4 et les beta pcsx2 0.9.5)

quand à la version pcsx2 0.9.2,le jeu peut etre plus lent,le son bug,mais les persos que j'ai cité au dessus fonctionnent.

et pour finir je te propose un pack contenant l'émulateur pcsx2 0.9.4 +
une version hackée du même nom appelée pcsx2 0.95 svn389 3x

sans virus et testés par mes soins
PACK émulteur+bios:
[vous ne pouvez pas voir le lien].[enregistrez vous ici]

Tuto en anglais:

Running PCSX2 Guide for Noobs
Running PCSX2 Guide for Noobs
by cottonvibes
------------------------------------------

This guide has been translated into Spanish by legatosama.
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
------------------------------------------

about:
This guide will show you how to run the emulator and get the best results.
The guide explains everything you have to do! If you follow all the directions, the game should work. The speed depends on your PC.

Note: Before asking questions, check the compatibility list to see if the game you want to run is supported!
[vous ne pouvez pas voir le lien].[enregistrez vous ici]

Also, please note that some games have recently become playable but have not yet been added to the compatibility list; and in some rare cases, games that were once playable, have been broken. This is the case with every new release. If a game dosn't work that was once playable, you can always revert back to an older version of PCSX2.

Note 2: To get a general idea of how the game would run on your PC, look in the screenshots thread for the game you want to play, and then look at the PC specs and FPS the user got with the game and compare it to your system.
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
------------------------------------------
Recommended System: (Will run optimized games at full speed or close to full speed; ie. games like FFX, FFXII, Disgaea 2)

3.0 Ghz or higher Intel Core 2 Duo or Quad-Core
8600 GT or higher
1GB Ram (2GB if using Vista)

Optimum System:

4.0 Ghz Intel Core 2 Duo or Quad-Core
8800 GT or higher
2GB Ram


NOTE 1: PCSX2 needs a very powerful computer to run games at full speed. If you have a single core processor, you will not get full speed. If you have an old graphics card, you will not get full speed.
NOTE 2: PCSX2 is more CPU dependant than GPU dependant. Most of the time, it will be that your CPU is too weak to run games at full speed.
NOTE 3: Don't use a Laptop!!! only the most expensive laptops can run pcsx2 at normal speeds. They also will get really HOT!!!
------------------------------------------
------------------------------------------


THE GUIDE:
------------------------------------------
* Step 1: Get PCSX2
------------------------------------------
1) Download PCSX2 9.4 Binary
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
2) Download PCSX2 BETA (optional, and not supported in forums)
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
------------------------------------------
------------------------------------------
* Step 2: Download latest Plugins
------------------------------------------
Graphics Plugins: (Be sure to update these plugins)

GSdx
[vous ne pouvez pas voir le lien].[enregistrez vous ici]

ZeroGs (latest version included with pcsx2 download)
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
------------------------------------------

Sound Plugins:

Peops SPU2 (Most compatible)
Included with pcsx2 download

ZeroSPU2 (If problems with peops, try this)
Included with pcsx2 download

SPU2ghz (Beta, not stable)
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
------------------------------------------

Pad Plugins:

LilyPad (my favorite, very compatible; lots of options)
[vous ne pouvez pas voir le lien].[enregistrez vous ici]

MegaPad
[vous ne pouvez pas voir le lien].[enregistrez vous ici]

TwinPad
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
------------------------------------------
------------------------------------------
* Step 3: Get the Bios
------------------------------------------
NOTE: Get your OWN bios from YOUR ps2!!! (We don't support pirating here on the forums, if you download a PS2 bios it is ILLEGAL; even if you own a ps2, you must dump your OWN bios)

Heres how to dump the bios from you ps2:

Via LAN
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
Via USB
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
------------------------------------------
------------------------------------------
* Step 4: (optional) Create an ISO image of your game.
------------------------------------------

*Here are some programs that let you make ISOs*

DVD Decryptor (Recommended because its Free)
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
Alcohol 120% (Trial Version)
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
Magic ISO (Trial Version)
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
------------------------------------------
------------------------------------------
* Step 5: Running PCSX2 For the first time
------------------------------------------
(NOTE: you must have administrative privileges. if using vista, right click pcsx2.exe and select "Run as Administrator")

1) when you run PCSX2.exe for the first time it will ask you to log on and off to get access to memory.
2) select "yes" to message
3) system logs off
4) log back in windows as the same User
5) Run PCSX2.exe again, and it should start up; this time it won't have any messages.
------------------------------------------
------------------------------------------
* Step 6: Configure PCSX2 (CPU config)
------------------------------------------
1) Start up pcsx2.exe
2) goto Config/ CPU
3) select "Multi Threaded GS Mode" and "Dual Core Mode" CheckBoxes (Must be using a multi-cored processor; ie. AMD X2, AMD Phenom, Intel Core 2 Duo, Intel Quad-Core)
4) under framelimiting, select Limit and type "75" (this limits emulation speed to 75fps which is nice for RPGs, you can also select 60fps if you want it running at
normal speed)
5) select ok
6) you will now have to restart pcsx2.exe, so exit and start it again
------------------------------------------
------------------------------------------
* Step 7: Configure PCSX2 (Plugins)
------------------------------------------
1) If you havn't already, you must put all the plugins you downloaded in PCSX2's plugins folder
NOTE 1: gsdx requires you to put the d3d9_36.dll and d3d10_36.dll in the main pcsx2 directory.
NOTE 2: If you get an error using PEOPS plugin, download the Required MS VC DLL's from the link below
[vous ne pouvez pas voir le lien].[enregistrez vous ici]
2) Run PCSX2.exe and goto Config/ Configure
3) you will now be able to select all your plugins

Configuring Graphics Plugin: (See Step 2 for download links)

1) If using an Intel Core 2 Duo or Quad-Core select "GSdx (MSVC 15.00, SSSE3)0.1.7"
or
If using an AMD X2, or any other processor select "GSdx (MSVC 15.00, SSE2)0.1.7"

2) Select "Configure"
3) Select your Monitor's Resolution (ie. 1024x768)
4) If Using Vista and have a DX10 Graphics Card select "Direct3D10 (HardWare)"
or
If Using XP select "Direct3D9 (HardWare)"
5) Select Pixel Shader 3.0 (if available)
or
Select Pixel Shader 2.0
(if you get a blank list and can't select anything, then you have too old of a graphics card and need to upgrade)
6) Under Interlacing, select None (depends on game, more on this later)
7) Select the Aspect Ratio, If using a normal computer monitor select 4:3, if using an HDTV select 16:9, if using a widescreen PC Monitor you can select Stretched or 16:9
8) Under D3d Internal, If using a weak graphics card Click the "Native" checkbox
or
if using a powerful graphics card, set the internal resolution to the same as your monitor's resolution (ie. 1024x768)
9) Click the "NLOOP Hack" checkbox until it turns grey (not black)
10) Click "Texture Filtering" checkbox and make it black, (NOTE: only if you have a good graphics card, if not then leave this unchecked)
11) Click "Logarithmic Z" checkbox, make it black
12) Click "Alpha Correction" checkbox, make it black
13) Click "OK"
------------------------------------------

Configuring Sound Plugin:

1) Select either Peops SPU2 or ZeroSPU2 (i recommend peops)
2) Select configure

* if using Peops SPU2 *

3) select volume (i put it on loud)
4) select "No Reverb"
5) select either "Gaussian interpolation" or "Cubic Interpolation" (i put it on Cubic Interpolation cuz it sounds better)
6) leave all other checkboxes unchecked
7) select "OK"

* if using ZeroSPU2 *

3) select "Time Scaling" checkbox
4) leave other checkboxes unchecked
5) select "OK"
------------------------------------------

Configuring PADS:

1) select lilypad plugin (For both First Controller and Second Controller, even if you only have one controller) and click configure
2) Under Pad Options/Pad 1, select "Start in analog mode"
3) click the "Pad 1" tab on top
4) configure your gamepad by pressing the appropiate buttons for "Square, Triangle, etc.."
5) if when you press "UP/LEFT/DOWN/RIGHT" nothing happens, Use "Vert Axis" and "Horiz Axis" instead.
6) if your gamepad has Forced Feedback select Gamepad Motor 1 (1) -> "Constant", then select "Big Motor"
next select Gamepad Motor 1 (2) -> "Sine", then select small motor
7) Click "OK"
------------------------------------------

Configuring CDROM:

* If running an ISO: *
1) select linuzapps iso
2) thats it, you don't need to configure it

* If running from a cd/dvd drive *
1) select peops CDVD Driver
2) if using XP select W2K/XP commands
3) select the drive letter that you have your PS2 disc in
4) select Thread read
5) click "Use additional 4 Mbyte data cache"
6) leave everything else at their default states
7) Click "ok"
------------------------------------------

Configuring Other Plugins:

1) leave all other plugins at the default null drivers
------------------------------------------

Selecting the Bios:

1) you should have dumped your bios (see step 3) and put it in the pcsx2 bios folder
2) select the bios you dumped from the drop down menu
------------------------------------------
------------------------------------------
* Step 8: Setting Up Memory Cards
------------------------------------------
1) Run PCSX2.exe and goto Config/Memcards
2) Make sure that Memory Card 1 is set to the file Mcd001.ps2 and Memory Card 2 is set to file Mcd002.ps2 are set (this is done by default, so you don't have to do anything)

*We now need to format the Memory Cards, just like with the real PS2!*

3) Go back to the plugins config menu and set your CD Plugin to "CDVDnull Driver 0.6.0" (you don't need to configure anything)
4) Now goto File/ Run CD/DVD
5) Now PCSX2 will run the Playstation 2 bios
6) While in the PS2 Bios, goto Browser
7) Select memory card 1 and it will ask to format it, select "yes"
8) Select memory card 2 and it will ask to format it, select "yes"
9) Now exit PCSX2, (if running in fullscreen, press ESC then alt-F4 to exit)
10) Restart PCSX2.exe and set you CD plugin back to what it was before.
11) You will now be able to use your memory cards in games.

NOTE 1: Some games have problems detecting/saving to the memory cards. If you followed the directions in this guide, and the memory cards don't work in the game, then the only way you can save is by using the "Quick Save" function (F1 = Quick Save to Current Slot, F3 = Quick Load to Current Slot, F2 = Switch Current Slot)
NOTE 2: When available, its always better to save to the memory card instead of using the quick save function. Sometimes PCSX2 will have problems loading quick saves. So if you can, save your game regularly using the save function provided in the game to avoid problems.

------------------------------------------
------------------------------------------
* Step 9: Running the game
------------------------------------------
1) select File/ Run CD/DVD

* if using Linuzapps *
2) locate your iso
3) click "OPEN"
4) the game should play

* if using peops CDVD plugin *
2) the game just runs by itself from the drive you selected
------------------------------------------

AND THATS IT!!!!!!!!
if you followed all the directions, everything should work!!!
Have fun!

Wahou merci de m'avoir répondu c'est super simpa
Je vais le testé même si ma config est pas super :p
merci encore

De rien l'ami,je persiste quand même qu'il faut un bon pc

tré bn tré tré bn merci

question avec ati sa fonctionne bien ou pas ???

oui perso j'ai une 2400 pro, l'emu utilise surtout le cpu